男主尺寸太大给女主扩充片段

Stock code: 002214

Investor Relations

Stock code: 002214

Investor Relations

product description

  • Full real-time display

    Front-end temperature measurement, accurate temperature measurement
  • H.264

    H.264 network video digital storage and transmission
  • Rich interface

    Rich interfaces for easy integration


  • easy and convenient

    The system only needs to connect the power cable and network cable

Technical Parameters

project

DLSC-N318

DLSC-N337

DLSC-N625

DLSC-N642

Infrared Detectors

Detector type

Uncooled focal plane micro-heat type

Pixel

384 × 288

640 × 480

Infrared image performance

Field of View / Minimum Focal Length

25 ° × 19 ° / 0.3m

12 ° × 9 ° / 0.5m

25 ° × 19 ° / 0.3m

15 ° × 11 ° / 1m

Spatial resolution

1.39mrad

0.67mrad

0.68mrad

0.41mrad

Thermal sensitivity

≤0.06℃@30℃

Frame rate

50 / 60Hz

focusing

Automatic / manual electrical focusing

Wavelength range

8 ~ 14μm

Visible light performance

Zoom factor

20x optical zoom

Image Resolution

2 million pixels, 1080P

Minimum illumination

0.005 (Lux)

PTZ performance

Horizontal rotation angle

0 ° ~ 360 ° continuous rotation

Preset position

Support 255, support angle feedback

Loading method and range of motion

Top load: -90 ° ~ + 90 °

measuring

Temperature measurement range

-20 ℃ ~ + 650 ℃

Accuracy

± 2 ℃ or ± 2% (reading range), whichever is greater

Temperature correction

automatic / manual

Measurement mode

Software arbitrary setting

Image storage

Raw image acquisition

The back end manually collects single frame and 25 frames of raw data images.

Image storage

H.264 network video digital storage and transmission

Single photo save, BMP format

Power system

External power

220AC

Power consumption

≤75W (when working at 25 ℃)

Environmental parameters

Operating temperature

-40 ℃ ~ + 65 ℃

Protection class

IP66

humidity

≤90% (non-condensing)

Equipment automatic identification management

The heat map collected by the system is automatically identified, and the equipment target that the heat map can be effective is identified by image registration to ensure the validity of the temperature detection.

Anti-false alarm recognition system

All temperature measurements are based on effective target recognition. According to the inspection strategy, only labeled equipment can be measured, and external interference heat sources are automatically eliminated, effectively preventing false alarms.

Detailed equipment working status management

Establish a management system for all equipment and equipment parts, and perform temperature analysis and record of all equipment parts within the inspection range of the infrared camera at the same time as automatic inspection. When alarming, you can go to the specific equipment failure part.

Automatic cruise

Adopting a preset PTZ, you can set more than 128 positions that need to be detected regularly, provide multiple modes of automatic cruise scheme, realize fully automatic operation, and achieve multiple inspections, automatic warnings, and automatic output of the working status of the device multiple times a day Reporting and other functions. Reduced the number of on-site inspections and improved the operating efficiency of operators.

Automatic warning

During the system cruise, if the temperature of the target equipment is abnormal, it will automatically alarm. The alarm information has text and sound information to remind the operator of the specific alarm location status information in order to track the fault point, confirm the alarm situation and eliminate the fault.

Automatic report generation

The system software can automatically generate a single infrared image of the device contact temperature analysis report; or a comprehensive report, that is, the system can automatically record the temperature value of each temperature measurement and generate a temperature report to reflect the contact's within a certain period of time Changes in temperature.

Infrared panorama

Provide wide field of view, high accuracy, 360-degree full field infrared image

Instrument front-end temperature measurement

Front-end temperature measurement, which does not rely on a computer system to directly output the temperature, and the temperature signal is directly superimposed on the video signal

Dual field of view surveillance, assisted identification

The infrared camera and the high-magnification visible light camera are installed on the same pan / tilt, which can not only ensure that the two cameras monitor the same device location, but also solve the problem that it is difficult to identify the installation location of the infrared camera, which is convenient for judging the device in time. Specific hot spots

Low network bandwidth

Support low-bandwidth operating mode, occupying no more than 0.8M of bandwidth while ensuring the simultaneous transmission of temperature data and image data

Development Kit

Instrument Real-Time Control Development Kit

Image Processing Development Kit

Infrared image transformation equipment intelligent identification development kit

Client remote control development kit

Client WEB remote control development kit

Development Support Response

Instant response, 24-hour on-site support, full Chinese support

Common protocol support

Direct support for IEC60870-5-104 protocol
Direct support for IEC61850 protocol

The website data is for reference only, if it is changed or adjusted without notice, the actual product shall prevail.

introduction

Feature advantage


◆ Instrument front-end temperature measurement technology

1.jpg

◆ Full real-time image without delay

◆ Zero illumination, smoke-permeable and water-permeable fog monitoring

2.jpg

◆ Temperature measurement is fast, accurate and uniform

◆ Infrared image compression and network transmission

◆ International leading substation equipment intelligent identification system

146284571341277554U4.jpg

◆ Automatic cruise

1462845722129365yqB7.jpg

◆ Various security, event, equipment and other management functions

◆ Normal operation in bad weather

5.jpg

◆ Automatic report generation function

1462845730432023hLGt.png

◆ Fully compatible with IEC61850 protocol

◆ Easy system integration


Infrared panorama (partial)


1462847525900241JY7P.jpg


Topology diagram of fixed online monitoring system


146284578838814248Uu.jpg


Application area

  • Intelligent power monitoring

    Electric equipment generates heat due to the action of current and voltage. If the equipment is abnormal, these heating mechanisms will intensify or behave differently ...
  • Petrochemical

    Many important equipment in the petrochemical industry work under high temperature and pressure conditions, and most of them are process operations and cycle operations ...
  • Forest fire prevention

    Infrared camera fire warning / far infrared camera system 24-hour non-stop monitoring / intelligent temperature gray warning / forest fire, residual fire monitoring ...
  • Rail

    The railway system is a very large and complex system, with countless electric locomotives, supporting electrical equipment, catenary cables ...

Product consultation

Advisory message

Verification code

Can't see clearly, change another

    contact us

    400-887-1897

    [email protected]
    No.639 Binkang Road, Binjiang District, Hangzhou, Zhejiang Province

    Follow us

    Zhejiang Public Network Security No. 33010802004567

    © 2014 Dali Technology Zhejiang ICP No. 11030830 Sitemap

    Contrast bar

    hide

    展开 | 关闭 Contrast | Expand | Close
      Email subscription to the official online store
    Your information has been submitted successfully, we will contact you as soon as possible!